王大銘 教授 / Da-Ming Wang Professor

Index
王大銘 教授
Da-Ming Wang
電話(02)3366-3006
傳真(02)23623040
電子郵件 daming@ntu.edu.tw
辦公室:119
研究室資料

膜分離實驗室

工123
(02)2366-0433
  • 學經歷

台灣大學　　　化工學士，1983
美國賓州州立大學　化工博士，1992

  • 研究主題

膜分離技術
膜分離技術不僅可以突破傳統分離技術的瓶頸，更可大幅提高能源使用效率。目前研究是以製備滲透蒸發及膜蒸餾程序所需的膜為主，下一步研究方向則是結合孔洞控制及材料改質的技術來製備可用於蛋白質分離及水處理的低結垢濾膜。

分子模擬

另一個研究方向是利用分子模擬來瞭解分子在高分子膜中的輸送機制以及探討高分子與溶劑間的交互作用。目前研究是以分子模擬來探討藥物透膜的過程。下一步的方向則是探討高分子與溶劑間的交互作用對高分子溶液微結構的影響。

組織工程

在組織工程方面的研究方向是以基材的製備為主，所用的材料是生物可分解的PLGA，PLLA以及天然的幾丁聚醣，目前正與台大牙醫學系共同開發牙周病治療所需的GTR膜以及具細胞選擇性的骨再生基材。

  • 最新研究

1.Effect of solvent quality on mass transfer and morphology evolution during membrane forming by vapor-induced phase separation 高分子溶劑之溶解力對蒸氣誘導相分離薄膜製程中質量傳遞及結構演變之影響 Da-Ming Wang. sponsored by National Science Council. NSC 97-2221-E-002-031- MY2. NT$947,000. 8/1/2009-7/31/2010

2.Membrane microstructure control and conditions of membrane preparation for nonsolvent induced phase separation 非溶劑誘導型相分離製程條件與膜孔微結構操控技術 Da-Ming Wang. sponsored by Industrial Technology Research Institute. NT$500,000. 4/1/2009-11/30/2009

  • 榮譽獎項
  1. Editor, Journal of Chemical Engineering of Japan, 2009-now
  2. Editorial Board, Journal of Taiwanese Institute of Chemical Engineers, 2006-now
  3. Editorial Board, Applied Membrane Science and Technology, 2005-now
  4. Guest Editor, Advances in chitin/chitosan science and their applications, in Carbohydrate Polymers, 2010
  5. Plenary lecturer, AMS6 (Aseanian Membrane Society), Sydney, Nov. 22-26, 2010.
  6. 台大慶齡工業研究中心主任 (2011/8-now)
  7. 台大慶齡工業研究中心副主任 (2007/8-2011/7)
  8. 輸送現象暨應用研討會籌備委員 (2001-2009)
  9. Scientific Committee Member, AMS5 (Aseanian Membrane Society) 2009, Kobe, July 12-14, 2009
  10. Scientific Committee Member, AMS7 (Aseanian Membrane Society) 2012, Busan, July 4-6, 2012
  11. Scientific Committee Member, AMS8 (Aseanian Membrane Society), Xian, July 16-19, 2013.
  12. 台灣大學「教學優良獎」2013
  13. 台灣大學「教學優良獎」2017
  1. Y.S. Luo, K.C. Cheng, C.L. Wu, C.Y. Wang, T.H. Tsai, D.M. Wang, “Preparation of epoxy monoliths via chemically induced phase separation”, Colloid Polym. Sci., 291, 1903-1912 (2013). (SCI)
  2. A. Venault, Y. Chang, D.M. Wang, D. Bouyer, “A Review on Polymeric Membranes and Hydrogels Prepared by Vapor-Induced Phase Separation Process”, Polym. Rev., 53, 568-626 (2013). (SCI)
  3. D.M. Wang, J.Y. Lai, “Recent advances in preparation and morphology control of polymeric membranes formed by nonsolvent induced phase separation”, Current Opinion in Chemical Engineering, 2, 229-237 (2013). (SCI)
  4. A. Venault, Y. Chang, J.R. Wu, D.M. Wang, “Influence of solvent composition and non-solvent activity on the crystalline morphology of PVDF membranes prepared by VIPS process and on their arising mechanical properties”, J. Taiwan Inst. Chem. Engr., 45, 1087-1097(2014). (SCI)
  5. R.Y. Tsai, S.C. Hung, J.Y. Lai, D.M. Wang, H.J. Hsieh, “Electrospun chitosan–gelatin–polyvinyl alcohol hybrid nanofibrous mats: production and characterization”, J. Taiwan Inst. Chem. Engr., 45, 1975-1981(2014). (SCI)
  6. R.Y. Tsaia, P.W. Chen, T.Y. Kuo, C.M. Lin, D.M. Wang, T.Y. Hsien, H.J. Hsieh “Chitosan/pectin/gum Arabic polyelectrolyte complex: Process-dependent appearance, microstructure analysis and its application”, Carbo. Polym., 101, 752-759(2014). (SCI) (合著)
  7. C.L Lai, Y.J. Fu, J.T. Chen, D.M. Wang, Y.M. Sun, S.H. Huang, W.S. Hung, C.C. Hu, K.R. Lee, “Composite of cyclic olefin copolymer with low graphene content for transparent water-vapor barrier films”, Carbon, 90, 85-93 (2015).(SCI)
  8. R.Y. Tsai, T.Y. Kuo, S.C. Hung, C.M. Lin, T.Y. Hsien, D.M. Wang, H.J. Hsieh, “Use of gum arabic to improve the fabrication of chitosan-gelatin-based nanofibers for tissue engineering”, Carbohydrate Polymers, 115, 525-532 (2015). (SCI) (合著)
  9. P.C. Li, G.M. Liao, S.R. Kumar, C.M. Shih, C.C. Yang, D.M. Wang, S.J. Lue, “Fabrication and characterization of chitosan nanoparticle incorporated quaternized poly(vinyl alcohol) composite membranes as solid electrolytes for direct methanol alkaline fuel cells”, Electrochimica Acta, 187, 616-628 (2016).(SCI)
  10. W.C. Wu, D.M. Wang, Y.C. Lin, C.A. Dai, K.C. Cheng, M.S. Hu, B.S. Lee, “Hydrogen bonds of a novel resin cement contribute to high adhesion strength to human dentin”, Dental Materials, 32, 114-124 (2016). (SCI)
  11. W.L. Hung, D.M. Wang, J.Y. Lai, S.C. Chou, “On the initiation of macrovoids in polymeric membranes – effect of polymer chain entanglement”, J. Membrane Sci., 505, 70-81 (2016). (SCI)
  12. S.L. Su, D.M. Wang, J.Y. Lai, “Critical residence time in metastable region – a time scale determining the demixing mechanism of nonsolvent induced phase separation”, J. Membrane Sci., 529, 35-46 (2017). (SCI)
  13. Y.H. Li, D.M. Wang, T.Y. Hsien; K.Y. Chan, J.Y. Lai, “Polymer inclusion membranes with strip dispersion”, Water, 9, 399 (2017). (SCI)